ISO 9001:2015 Certified | Cage Code: 7L0f6
TYPICAL PROPERTIES of UDEL® |
||
| ASTM or UL test | Property | Udel® |
| PHYSICAL | ||
| D792 | Density (lb/in³) (g/cm³) |
0.045 1.24 |
| D570 | Water Absorption, 24 hrs (%) | 0.3 |
| MECHANICAL | ||
| D638 | Tensile Strength (psi) | 10,200 |
| D638 | Tensile Modulus (psi) | 360,000 |
| D638 | Tensile Elongation at Yield (%) | 30 |
| D790 | Flexural Strength (psi) | 15,000 |
| D790 | Flexural Modulus (psi) | 400,000 |
| D695 | Compressive Strength (psi) | 13,000 |
| D695 | Compressive Modulus (psi) | 375,000 |
| D785 | Hardness, Rockwell | M82 / R128 |
| D256 | IZOD Notched Impact (ft-lb/in) | 1.3 |
| THERMAL | ||
| D696 | Coefficient of Linear Thermal Expansion (x 10-5 in./in./°F) |
3.10 |
| D648 | Heat Deflection Temp (°F / °C) at 264 psi |
340 / 171 |
| D3418 | Glass Transition Temp (°F / °C) | 374 / 190 |
| – | Max Operating Temp (°F / °C) | 300 / 149 |
| C177 | Thermal Conductivity (BTU-in/ft²-hr-°F) (x 10-4 cal/cm-sec-°C) |
– – |
| UL94 | Flammability Rating | HB |
| ELECTRICAL | ||
| D149 | Dielectric Strength (V/mil) short time, 1/8″ thick | 425 |
| D150 | Dielectric Constant at 1 MHz | 3.14 |
| D150 | Dissipation Factor at 1 MHz | 0.0008 |
| D257 | Volume Resistivity (ohm-cm)at 50% RH | 5 x 1016 |
NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets.